Dura Wood Lacquer Gloss
We help you build your dream home
Description
Dura Wood Lacquer Gloss is water based Glossy clear lacquer for wood which provides long lasting protection and a smooth finish on wooden articles at an economical price.
Features
- One pack system
- NO / Low VOC compliance
- Low Odor, Non flammable
- Superior Gloss ,Clarity ,hardness & an Excellent durability
- Quick drying, shows an excellent an early block resistance to provide improved stack time
- Resistant to scratches, stains
Specifications
These technical data are determined for each lot before its release by our quality control laboratory.
Technical Data
| Unit | Value | |
| Solids content (DIN 53 189/ ISO 1625) |
% | 33+2 |
| Viscosity (B4 Ford cup @ 250C) Sec. (20% Dilution in water) |
25-35 | |
| Viscosity (B4 Ford cup @ 250C) Sec. (20% Dilution in water) |
25-35 | |
| pH | 7.5 – 8.5 | |
| Drying (Ambient Temperature) | Min | 10-30 |
Surface Preparation & Application
- Surface must be clean, dry, and free of all contaminants. Sand raw wood with 220 grit before staining & topcoat. Also do sanding between coats with 320 grit or extra fine pad to assure proper appearance & adhesion.
- Conventional Spray, Air Assisted Airless, HVLP, Airless.
- HVLP: Use a 0.043” - 0.051” (1.1--1.3 mm) nozzle / tip assembly & Medium Air Cap.
- Air-assisted airless or Airless: 0.009”—0.013” tip, 300—600 psi fluid pressure, 10-30 psi air pressure.
- Allow 30 minutes -2 hours to dry before sanding (Depends upon temperature / humidity).
- Sand with 320 grit or finer(extra fine finishing pad) between coats;1-2 coats recommended.
Stain Recommendation
Recommended Dura Aqua stain for best results and superior adhesion and Dura Wood Seal Sanding Sealer is recommended for optimum performance and appearance. Always adequately check adhesion to ensure proper performance.
Storage
Dura Wood Lacquer Gloss should not be stored for longer than 6 months before processing. As far as possible, storage should be at a uniform temperature in the region of 10 – 25 °C. The product should, in principle, be kept away from frost.
The technical data ascertained by our quality control laboratory at the time of product release may vary according to the storage time and storage conditions and may deviate from the stated limits.
Industrial Safety and Environmental Protection
Not a hazardous substance within the meaning of the current Dangerous Substances Regulations (GefStoffV). A safety data sheet is available on request.
